Aruba ultra tri-band filtering eliminates interference between 5 GHz and 6 GHz and prevents gaps in channel coverage. To ensure high availability, the 630 Series includes dual port hitless failover for ethernet and power.
R7J27A Specification |
|
|
Ports |
E0, E1: Two Ethernet wired network ports (RJ-45) |
|
Mounting |
A mounting bracket has been pre-installed on the back of the AP. This bracket is used to secure the AP to any of the mount kits (sold separately). |
|
Connectivity, standard |
WLAN: tri radio, 2.4GHz, 5GHz and 6GHz (concurrent) 802.11ax 2×2 MIMO Bluetooth Low Energy (BLE5.0) and Zigbee (802.15.4) radio |
|
Input voltage |
12 Vdc (+/- 5%) or 48 Vdc (nominal) POE |
|
Power Consumption |
23.8W worst case (POE powered), 20.7W worst case (DC). Excludes power needed to supply up to 5W to an attached USb device. |
|
Heat dissipation |
66.3 BTU/hr worst case (POE powered), 57.9 BTU/hr worst case (DC) |
|
Certifications |
UL2043 plenum rating |
|
Regulatory |
FCC/ISED |
|
Wi-Fi antenna |
Two integrated dual-band downtilt omni-directional antennas for 2×2 MIMO with peak antenna gain of 4.6dBi in 2.4GHz, 7.0dBi in 5GHz and 6.3dBi in 6GHz. Built-in antennas are optimized for horizontal ceiling mounted orientation of the AP. The downtilt angle for maximum gain is roughly 30 degrees. Combining the patterns of each of the antennas of the MIMO radios, the peak gain of the combined, average pattern is 2.9dBi in 2.4GHz, 4.9dBi in 5GHz and 4.3dBi in 6GHz. |
|
Radio coverage |
Indoor, tri radio, 2.4GHz, 5GHz and 6GHz (concurrent) 802.11ax 2×2 MIMO |
|
Product Dimensions (metric) |
220mm (W) x 220mm (D) x 50mm (H) |
