Huawei Hardware Host for the AC6800V (6*GE RJ45,6*10GE SFP+,Dual Slots of power,With Power Module)
AC6800V-HOST Specification
|
|
|
Dimensions (height x width x depth) |
86.1 mm x 447 mm x 708 mm NOTE The AC6800V should be installed in a standard IEC cabinet (19-inch). |
|
Power Supplies |
AC |
|
Forwarding Capability |
60 Gbit/s |
|
Maximum Number of Managed APs |
10K |
|
Maximum Number of Access Users |
100K |
|
AP-AC Networking |
Layer 2 or Layer 3 networking |
|
Forwarding Mode |
Direct forwarding (distributed forwarding or local forwarding) or tunnel forwarding (centralized forwarding) |
|
AC Active/Standby Mode |
1+1 HSB or N+1 backup |
|
Radio Protocols |
802.11 a/b/g/n/ac/ac wave 2/ax |
|
Interface type |
6 x 10GE(SFP+) + 6 x GE |
|
Maximum power consumption |
350 W |
|
Weight |
Net weight: 21 kg |
|
Operating temperature and altitude |
-60 m to +1800 m: 0°C to 45°C 1800 m to 5000 m: Temperature decreases by 1°C every time the altitude increases 300 m. |
|
Relative humidity |
5% RH to 95% RH, noncondensing |
|
Power modules |
550W Dual Power Supply, 1+1 Redundant Backup |
|
AC input voltage |
Rated voltage range: 100V AC～240V AC, 50/60Hz Maximum voltage range: 90 V AC to 264 V AC, 47 Hz to 63 Hz |
|
Number of managed APs |
Central APs：1280 Common APs and RUs：10240 NOTE The RUs managed by the WLAN AC do not occupy the AC’s license resources. However, the total number of managed common APs and RUs cannot exceed the upper limit allowed by the AC. |
|
Number of access users |
Entire device: 100K NOTE The maximum number of access users varies depending on the authentication mode. |
|
Number of MAC address entries |
160K |
|
Forwarding capability |
60Gbit/s NOTE Packet length: 512 bytes |
|
Number of VLANs |
4K |
|
Number of routing entries |
IPv4: 16K IPv6: 4K |
|
Number of ARP entries |
160K |
|
Number of multicast forwarding entries |
2K |
|
Number of DHCP IP address pools |
256 IP address pools, each of which contains a maximum of 64K IP addresses |
|
Number of local accounts |
10K |
|
Number of ACLs |
32K |
|
User group management |
128 user groups Each user group can reference a maximum of 8 ACLs. A maximum number of ACL rules that can be associated with each user group: 512 |
