JL070A is the switch with 8-PoE+ Internal Power Supply. The Aruba 2530 Switch Series provides security, reliability, and ease of use for enterprise edge, branch office, and SMB deployments.
JL070A Specification |
|
|
Physical characteristics |
|
|
Dimensions |
10(w) x 9.68(d) x 1.75(h) in (25.4 x 24.59 x 4.45 cm) (1U height) |
|
Performance |
|
|
100 Mb Latency |
< 1.3 µs (LIFO 64-byte packets) |
|
1000 Mb Latency |
< 1.3 µs (LIFO 64-byte packets) |
|
Throughput |
up to 4.1 Mpps (64-byte packets) |
|
Switching capacity |
5.6 Gbps |
|
MAC address table size |
16000 entries |
|
Environment |
|
|
Operating temperature |
32°F to 113°F (0°C to 45°C) |
|
Operating relative humidity |
15% to 95% @ 104°F (40°C), noncondensing |
|
Nonoperating/Storage temperature |
-40°F to 158°F (-40°C to 70°C)
|
|
Nonoperating/Storage relative humidity |
15% to 90% @ 149°F (65°C), noncondensing |
|
Altitude |
up to 10,000 ft (3 km) |
|
Acoustic |
Power: 0 dB, Pressure: 0 dB |
|
Electrical characteristics |
|
|
Frequency |
50/60 Hz |
|
Maximum heat dissipation |
29 BTU/hr (30.6 kJ/hr), (switch only: 29 BTU/hr; combined switch + max. PoE devices: 239 BTU/hr) |
|
AC voltage |
100 – 127/200 – 240 VAC |
|
Current |
0.9/0.5 A |
|
Maximum power rating |
70.2 W |
|
Idle power |
5.3 W |
|
PoE power |
67 W PoE |
|
Notes |
Idle power is the actual power consumption of the device with no ports connected. Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE power is the total power budget available to all PoE ports. |
