Huawei S9703 Basic Engine AC Bundle(Including Assembly Chassis*1,MCUA Main Board*2,800W AC Power*2,48-Port 10/100/1000BASE-T Interface Card(X1E,RJ45)*1,Basic Software*1)
EH1Z03EACM00 Specifications |
|
|
Series |
Huawei S9703 Switch |
|
Bundle |
Huawei S9703 Basic Engine AC Bundle(Including Assembly Chassis*1,MCUA Main Board*2,800W AC Power*2,48-Port 10/100/1000BASE-T Interface Card(X1E,RJ45)*1,Basic Software*1) |
|
Switching capacity |
2.88 Tbit/s or 5.76 Tbit/s |
|
Packet forwarding rate |
2160 Mpps |
|
Service slots |
3 |
|
Wireless network management |
Native AC AP access control, AP region management, and AP profile management Radio profile management, uniform static configuration, and centralized dynamic management Basic WLAN services, QoS, security, and user management |
|
User management |
unified user management 802.1x, MAC address, and Portal authentication Traffic- and time-based accounting User authorization based on user groups, domains, and time ranges |
|
iPCA quality awareness |
Marking real service packets to obtain real-time count of dropped packets and packet loss ratio Counting number of dropped packets and packet loss ratio on devices and L2/L3 networks |
|
SVF 2.0 virtualization |
Virtualizing access switches (ASs) and APs into one logical device to simplify management and maintenance Two layers of ASs allowed in an SVF system Third-party devices allowed between SVF parent and clients |
|
VLAN |
Supports adding access, trunk, and hybrid interfaces to VLANs Supports the default VLAN Supports VLAN switching Supports QinQ and selective QinQ Supports MAC address-based VLAN assignment |
|
MAC address |
Supports automatic learning and aging of MA C addresses Supports static, dynamic, and blackhole MAC address entries Supports packet filtering based on sour ce MAC addresses Supports MAC address limiting based on ports and VL ANs |
|
STP/ERPS |
Supports STP (IEEE 802.1d), RSTP (IEEE 802.1w), and MSTP (IEEE 802.1s) Supports BPDU protection, root protection, and loop protection Supports BPDU tunnel ERPS (G.8032) |
|
IP routing |
Supports IPv4 routing protocols, such as RIP, OSPF, BGP, and IS-IS Supports IPv6 dynamic routing protocols, such as, RIPng, OSPFv3, ISISv6, and BGP4+ |
|
Multicast |
Supports IGMP v1/v2/v3, IGMPv1/v2/v3 snooping Supports PIM-SM, PIM-DM, PIM-SSM Supports MSDP, MBGP Supports prompt leave Supports multicast traffic control Supports multicast querier Supports suppression on multicast packets Supports multicast CAC Supports multicast ACL |
|
MPLS |
Supports basic MPLS functions Supports MPLS OAM Supports MPLS TE Supports MPLS VPN/VLL/VPLS |
|
Reliability |
Supports LACP and E-Trunk Supports VRRP and BFD for VRRP Supports BFD for BGP/IS-IS/OSPF/static route NSR, NSF, and GR for BGP/IS-IS/OSPF/LDP Supports TE FRR and IP FRR Supports Ethernet OAM (IEEE 802.3ah and 802.1ag) (Hardware level) HSR Supports ITU-Y.1731 Supports DLDP |
|
QoS |
Supports traffic classification based on Layer 2 headers, Layer 3 protocols, Layer 4 protocols, and 802.1p priority Supports actions of ACL, CAR, re-mark, and schedule Supports queue scheduling algorithms, such as SP, WRR, DRR, SP+WRR, and SP+DRR Supports congestion avoidance mechanisms, such as WRED and tail drop Supports H-QoS Supports traffic shaping |
|
Network synchronization |
Ethernet synchronization 1588v2 |
|
Dimensions (H x W x D in mm) |
175 x 442 x 489, 4U |
|
Chassis weight(empty) |
11 kg |
|
Operating Voltage |
DC: –40V to –72V AC: 90V to 290V |
|
Power supply capability of the equipment |
2200W |
