IBM System x3400 M3

новый сервер IBM System x3400 M3

работаем с 2018 года
поставлено 10 000+ единиц техники
как актуальных, так и снятых с производства поколений
цены и сервис – как родным

Технические характеристики стоечного сервера IBM System x3400 M3

Form factor	Tower or 5U Rack
Processor	Up to two six-core (up to 3.46 GHz) or quad-core (up to 3.6 GHz) Intel Xeon 5600 series processors with QuickPath Interconnect technology up to 6.4 GT/s, and up to 1333 MHz memory speed. Supports specific Quad-core Intel Xeon 5500 series processors via Configure-To-Order (CTO).
Memory cache	Up to 12 MB L3 for Xeon 5600 processors. Up to 8 MB L3 for Xeon 5500 processors.
Chipset	Intel 5520
Memory	Up to 16 DIMM sockets (eight DIMMs per processor). Up to 128 GB with 8 GB DDR3 RDIMMs and 16 populated DIMM slots (up to 64 GB with eight DIMMs per processor), or up to 48 GB with 4 GB DDR3 UDIMMs and 12 populated DIMM slots (up to 24 GB with six DIMMs per processor). RDIMMs Up to 16 single-rank RDIMMs for a maximum of 64 GB (16x 4 GB) Up to 16 dual-rank RDIMMs for a maximum of 128 GB (16x 8 GB) Up to 12 quad-rank RDIMMs for a maximum of 192 GB (12x 16 GB) UDIMMs Up to 16 single-rank UDIMMs for a maximum of 16 GB (16x 1 GB) Up to 16 dual-rank UDIMMs for a maximum of 64 GB (16x 4 GB) Intel Xeon 5600 series processors: 1333 MHz when one or two single-rank or dual-rank RDIMMs per channel are installed or one UDIMM per channel is installed 1066 MHz when one quad-rank RDIMM per channel is installed or two UDIMMs per channel are installed 800 MHz when three single-rank or dual-rank RDIMMs or two quad-rank RDIMMs per channel are installed Quad-core Intel Xeon 5500 series processors: 1333 MHz when one single-rank or dual-rank RDIMM per channel is installed or one UDIMM per channel is installed 1066 MHz when two single-rank or dual-rank RDIMMs per channel are installed, or one quad-rank RDIMM per channel is installed, or two UDIMMs per channel are installed 800 MHz when three single-rank or dual-rank RDIMMs or two quad-rank RDIMMs per channel are installed Dual-core Intel Xeon 5500 series processors only support memory speed at 800 MHz. The server supports both 1.5 V and 1.35 V DIMMs. Mixing 1.5 V and 1.35 V DIMMs in the same server is supported for Intel Xeon 5600 series processor-based systems, in such a case all DIMMs operate at 1.5 V. Intel Xeon 5500 series processor-based systems do not support 1.35 V DIMMs.
Memory protection	ECC ChipKill (for x4-based RDIMMs) Memory mirroring Memory sparing
Disk drive bays	view Pic.4 Four 3.5″ simple-swap or four 3.5″ hot-swap SATA hard drive bays (only available in CTO) Eight 3.5″ hot-swap SAS/SATA hard drive bays (only available in CTO) Eight 2.5″ SFF hot-swap SAS/SATA SFF hard drive bays 16x 2.5″ SFF hot-swap SAS/SATA SFF hard drive bays Additional storage bay: 69Y0894 Additional 4x 3.5-inch LFF hot-swap SAS/SATA HDD upgrade kit 69Y0895 Additional 8x 2.5-inch SFF hot-swap SAS/SATA HDD upgrade kit (includes a 6 Gbps SAS expander)
Maximum internal storage	Up to 8.0 TB with 2 TB 3.5″ SS SATA HDDs (CTO only), or up to 16.0 TB with 2 TB 3.5″ HS SATA HDDs (CTO only), or up to 14.4 TB with 600 GB 2.5″ HS SAS HDDs. Intermix of SAS/SATA is supported.
RAID support	RAID 0, 1, 1E with M1015; RAID 0, 1, 5, 10, 50 with M5014 or M5015. Optional upgrade to RAID 5 is available for M1015. Optional upgrade to RAID 6, 60 is available for M5014/M5015. ServeRAID M1015 SAS/SATA Controller : -Two Mini-SAS internal connectors -Supports RAID levels 0, 1, and 10 -Supports RAID levels 5 and 50 with optional ServeRAID M1000 Series Advanced Feature Key -6 Gbps throughput per port -Based on the LSI SAS2008 6 Gbps RAID on Chip (ROC) controller -PCI Express 2.0 x8 host interface -Configurable stripe size up to 64 KB ServeRAID M5014 SAS/SATA Controller: -Two Mini-SAS internal connectors -Supports RAID levels 0, 1, 5, 10, and 50 -Supports RAID 6 and 60 with the optional M5000 Advanced Feature Key -Performance optimization for SSD drives with optional M5000 Series Performance Accelerator Key -6 Gbps throughput per port -PCI Express 2.0 x8 host interface -Based on the LSI SAS2108 6 Gbps ROC controller -256 MB of onboard cache -Optional Intelligent Li-Ion-based battery backup unit with the ServeRAID M5000 Series Battery Kit ServeRAID M5015 SAS/SATA Controller : -Two Mini-SAS internal connectors -Supports RAID levels 0, 1, 5, 10, and 50 -Supports RAID 6 and 60 with the optional M5000 Advanced Feature Key -Performance optimization for SSD drives with optional M5000 Series Performance Accelerator Key -6 Gbps throughput per port -PCI Express 2.0 x8 host interface -Based on the LSI SAS2108 6 Gbps ROC controller -512 MB of onboard cache -Standard Intelligent Li-Ion-based battery backup unit with up to 48 hours of data retention
Optical drive bays	Two with support for HH DVD-ROM or Multiburner (for all models except 8x 3.5″ HDDs), or one with support for UltraSlim DVD-ROM or Multiburner (for 8x 3.5″ HDD models). 46M0901 IBM UltraSlim Enhanced SATA DVD-ROM 46M0902 IBM UltraSlim Enhanced SATA Multiburner
External storage (optional)	Controller: 46M0830 ServeRAID M5025 SAS/SATA Controller 3 46M0930 ServeRAID M5000 Series Advance Feature Key 81Y4426 ServeRAID M5000 Series Performance Accelerator Key ServeRAID M5025 SAS/SATA Controller : -Two Mini-SAS external connectors -Supports RAID levels 0, 1, 5, 10, and 50 -Supports RAID 6 and 60 with the optional M5000 Advanced Feature Key -Performance optimization for SSD drives with optional M5000 Series Performance Accelerator Key -6 Gbps throughput per port -PCI Express 2.0 x8 host interface -Based on the LSI SAS2108 6 Gbps ROC controller -512 MB of onboard cache -Intelligent Li-Ion-based battery backup unit with up to 48 hours of data retention -Supports connectivity to the EXP3000, EXP2512, and EXP2524 storage expansion enclosures Storage bay: 172701X IBM System Storage® EXP3000 174712X IBM System Storage EXP2512 Express 174724X IBM System Storage EXP2524 Express
Tape drive bays	A maximum of two SATA tape drives or one SAS tape drive or one USB tape drive is supported. You can mix tape drives if needed up to a total of two. The SAS tape drive requires a SAS HBA to be installed in the server. The USB tape and RDX drive are connected to the dedicated USB tape drive connector on the system board. If two internal tape drives are installed, then the maximum number of optical drives is limited to one. Configurations with eight 3.5″ HDD bay configurations do not support tape drives (Figure 5). Configurations with twenty-four 2.5″ HDD bays support either one internal tape drive or one internal optical drive, but not both (pic. 4) 43W8480 IBM DDS Generation 5 SATA Tape Drive 46C5399 IBM DDS Generation 5 USB Tape Drive 39M5636 IBM DDS Generation 6 USB Tape Drive 43W8478 IBM Half High LTO Gen 3 SAS Tape Drive 44E8895 IBM Half High LTO Gen 4 SAS Tape Drive 46C5364 IBM RDX Removable Hard Disk System – Internal USB 160 GB Bundle 46C5387 IBM RDX Removable Hard Disk System – Internal USB 320 GB Bundle 46C5388 IBM RDX Removable Hard Disk System – Internal USB 500 GB Bundle
Ethernet	Integrated two Gigabit Ethernet ports(Broadcom 5709C): -Broadcom BCM5709C chip -TCP Offload Engine (TOE) support -Wake on LAN support -802.1Q VLAN tagging support -NIC Teaming (load balancing and failover)
PCI Expansion slots	Pic.5 System: Slot 1: PCIe 2.0 x8, full height, half length Slot 2: PCIe 2.0 x16 (x8 wired), full height, full length Slot 3: PCIe 2.0 x8 (x4 wired), full height, full length Slot 4: PCIe 2.0 x8 (x4 wired), full height, full length Slot 5: PCIe 2.0 x8, full height, full length Slot 6: PCI 32-bit/33 MHz, full height, half length PCI Express extender card (comes with standard models): Slot 7: PCIe x8 (x4 wired), full height, half length PCI-X extender card (only available in CTO): Slot 7: PCI-X 64-bit/133 MHz, full height, half length Slot 8: PCI-X 64 bit/133 MHz, full height, half length
External ports	Two USB 2.0 on front. Four USB 2.0, one DB-15 video, one DB-9 serial, one RJ-45 systems management, two RJ-45 network ports on rear. One internal USB port for embedded hypervisor. One internal USB port for internal USB tape drive.
Cooling	IBM Calibrated Vectored Cooling™ with six hot swap fans with N 1 redundancy (three fans standard, three fans optional, come with optional power supply).
Power supply	The server supports either one 670 W AC fixed power supply or up to two 920 W AC hot-swap redundant power supplies, providing N N redundancy. Standard models come with one power supply, either fixed or hot-swap. 44X0381 IBM Redundant Power Supply for x3400/3500
Hot-swap components	Hard drives, power supplies, fans
Systems management	UEFI, IBM Integrated Management Module (IMM), Predictive Failure Analysis, Light Path Diagnostics, Automatic Server Restart, IBM Systems Director and IBM Systems Director Active Energy Manager™, IBM ServerGuide. Standard Virtual Media Key for remote presence (graphics, keyboard and mouse, virtual media). Intelligent Platform Management Interface (IPMI) Version 2.0 Simple Network Management Protocol (SNMP) Version 3 Common Information Model (CIM) Web browser Optional 46C7527 IBM Virtual Media Key For Entry Systems : Remotely viewing video with graphics resolutions up to 1280×1024 at 75 Hz, regardless of the system state Remotely accessing the server using the keyboard and mouse from a remote client Mapping the CD or DVD drive, diskette drive, and USB flash drive on a remote client, and mapping ISO and diskette image files as virtual drives that are available for use by the server Uploading a diskette image to the IMM memory and mapping it to the server as a virtual drive
Security features	Power-on password, administrator’s password, Trusted Platform Module (TPM).
Video	Matrox G200eV with 16 MB memory integrated into the IMM. Maximum resolution is 1280×1024 at 75 Hz with 16M colors.
Operating systems supported	Microsoft Windows Server 2008 R2 and 2008, Red Hat Enterprise Linux 5 and 6, SUSE Linux Enterprise Server 10 and 11, VMware ESX 4.0 and 4.1, VMware ESXi 4.0 and 4.1 embedded hypervisor.
Limited warranty	One-year (7378 model) or 3-year (7379 model) customer-replaceable unit and onsite limited warranty with 9×5/next-business-day response time.
Service and support	Optional service upgrades are available through IBM ServicePacs®: 4-hour or 2-hour response time, 8-hour fix time, 1-year or 2-year warranty extension, remote technical support for IBM hardware and selected IBM and third-party (Microsoft, Linux, VMware) software.
Physical and electrical specifications	Tower: Width: 218.0 mm (8.6 in) Depth: 767.0 mm (30.2 in) Height: 440.0 mm (17.3 in) Weight: 27.10 kg (59.7 lb) (minimum configuration) 37.85 kg (83.4 lb) (maximum configuration) Rack (using the Tower-to-Rack Conversion Kit, 69Y0893): Width: 424.0 mm (16.7 in) Depth: 702.0 mm (27.6 in) Height: 218.0 mm (8.6 in) Weight: 25.80 kg (56.9 lb) (minimum configuration) 36.00 kg (79.3 lb) (maximum configuration) Supported environment: Air temperature Server on: 10 – 35° C (50 – 95° F); altitude: 0 – 915 m (3,000 ft) Server on: 10 – 32° C (50 – 90° F); altitude: 915 m (3,000 ft) – 2,134 m (7,000 ft) Server off: 5 – 45° C (41 – 113° F) Shipment: -40 – 60° C (-40 – 140° F) Humidity Server on: 20 – 80%; maximum dew point 21° C; maximum rate of change 5° C/hr Server off: 8 – 80%; maximum dew point 27° C Electrical 100 to 240 V ac; 50 – 60 Hz; 10 – 5 A Input kilovolt-amperes (kVA) (approximately): Minimum configuration: 0.60 kVA Maximum configuration: 0.82 kVA Btu output Ship configuration: 2013 Btu/hr (590 watts) Full configuration: 2788 Btu/hr (817 watts) Acoustical noise emission levels: 5.5 bels (idling) 6.0 bels (operating)