HP 1620-8G Switch
JG912A Specifications |
|
|
Type |
HPE OfficeConnect 1620 8G Switch |
|
Dimensions (W x D x H) |
26.59 x 16.21 x 4.39 cm (10.47 x 6.38 x 1.73 in) (1U height) |
|
Weight |
1 kg (2.2 lb) |
|
Mounting and enclosure |
Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included), wall mount |
|
I/O ports and slots |
8 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only |
|
Additional ports and slots |
1 RJ-45 console port to access limited CLI port |
|
Memory and processor |
MIPS @ 500 MHz, 32MB flash, 128MB SDRAM; packet buffer size: 4.1 Mb |
|
Performance |
100 Mb latency: < 7 µs 1000 Mb latency: < 5 µs Throughput: Up to 11.9 Mp/s (64-byte packets) Switching capacity: 48 Gb/s MAC address table size: 8192 entries |
|
Reliability |
MTBF (years): 138.89 |
|
Frequency |
50/60 Hz |
|
AC voltage |
100 – 240 V ac |
|
Maximum power rating |
7 W |
|
Operating temperature |
0° to 40°C (32° to 104°F) |
|
Operating relative humidity |
5% to 95%, noncondensing |
|
Nonoperating/storage temperature |
-40° to 70°C (-40° to 158°F) |
|
Nonoperating/storage relative humidity |
5% to 95%, noncondensing |
|
Altitude |
Up to 5 km (16,404 ft) |
|
Acoustic |
No fan |
|
Safety |
IEC 60950-1 EN 60950-1 CSA 22.2 60950-1 UL 60950-1 2nd Edition |
|
Emissions |
FCC part 15 Class A VCCI Class A EN 55022 Class A CISPR 22 Class A EN 55024 EN 61000-3-2 2000, 61000-3-3 ICES-003 Class A |
|
General protocols |
IEEE 802.1D MAC Bridges IEEE 802.1p Priority IEEE 802.1Q VLANs IEEE 802.3 Type 10BASE-T IEEE 802.3ab 1000BASE-T IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE 802.3az Energy Efficient Ethernet IEEE 802.3i 10BASE-T IEEE 802.3x Flow Control |
