Cisco One Catalyst 4500 E-Series Redundant Supervisor 8L-E
C1-X45-SUP8L-E/2 Specification |
|
| General | |
| Device Type | Control processor |
| Weight | 6.48 lbs |
| Processor / Memory / Storage | |
| Processors Installed | 1 x 1.8 GHz |
| RAM | 4 GB SDRAM |
| Flash Memory | 2 GB |
| Networking | |
| Form Factor | Plug-in module |
| Connectivity Technology | Wired |
| Remote Management Protocol | RMON 1, RMON 2 |
| Performance | Switching capacity: 560 Gbps ¦ Per-slot switching capacity: 48 Gbps ¦ Layer 2 bridging: 225 Mpps ¦ IPv4 routing: 225 Mpps ¦ IPv6 routing: 110 Mpps |
| Capacity | Flexible NetFlow entries: 128000 ¦ IPv4 routing table entries: 64000 ¦ IPv6 routing table entries: 32000 ¦ Queues per port: 8 ¦ QoS hardware entries: 64000 ¦ DHCP snooping entries: 12000 ¦ MAC addresses: 55000 ¦ Active VLANs: 4094 ¦ ARP entries: 47000 ¦ Spanning Tree Protocol instances: 12000 ¦ Switched virtual interfaces (SVIs): 4094 ¦ SPAN bidirectional sessions: 8 |
| Features | VLAN support, IPv6 support, Non-Stop Forwarding (NSF), Stateful switchover (SSO), Virtual Route Redundancy Protocol (VRRP) support, Access Control List (ACL) support, Quality of Service (QoS), PoE+, IPv4 support, Hot Standby Router Protocol (HSRP) support, Energy Efficient Ethernet, Virtual Routing and Forwarding (VRF), universal power over Ethernet (UPOE), Flexible NetFlow (FNF), 802.1x authentication, MACsec support, In-Service Software Upgrade (ISSU), Virtual Switching System (VSS), integrated Wireshark, TrustSec support, Field Programmable Gate Array, dynamic hardware route table allocations |
| Compliant Standards | IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.3ae, IEEE 802.1s, IEEE 802.3az |
| Communications | |
| Supported Flash Memory Cards | SD Memory Card |
| Expansion / Connectivity | |
| Interfaces | 1 x 1000Base-T (management) – RJ-45 ¦ 1 x console – RJ-45 ¦ 1 x USB – Type A ¦ 1 x USB – Type B ¦ 4 x 10GBase-SX – SFP+ |
| Miscellaneous | |
| MTBF | 491,750 hours |
| Compliant Standards | Plug and Play, CISPR 22 Class A, CISPR 24, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, CAN/CSA C22.2 No. 60950-1, GR-1089-CORE, VCCI Class A, KN24, GR-63-CORE, KN22 Class A, EN 300386, AS/NZS CISPR 22, EN61000-3-2, EN61000-3-3, FCC CFR47 Part 15 A, ETS 300 019-2-1 Class 1.2, ETS 300 019-2-2 Class 2.3, ETS 300 019-2-3 Class 3.2 |
| Power | |
| Power Over Ethernet (PoE) Supported | UPOE |
| Power Redundancy | Yes |
| Power Provided | 240 Watt |
| Environmental Parameters | |
| Min Operating Temperature | 32 °F |
| Max Operating Temperature | 104 °F |
| Humidity Range Operating | 10 – 90% (non-condensing) |
