Cisco 7606S Chassis,6-slot,Red System,2RSP720-3C-10GE,2PS
7606S-RSP7C-10G-R Specification |
|
| General | |
| Device Type | Router – with 2 x Cisco 7600 Series Route Switch Processor 720 10GE with PFC-3C |
| Enclosure Type | Rack-mountable – modular – 7U |
| Connectivity Technology | Wired |
| Data Link Protocol | Ethernet, Fast Ethernet, Gigabit Ethernet, 10 Gigabit Ethernet |
| Performance | IPv4 routing: 400 Mbps ¦ IPv6 routing: 200 Mbps ¦ Switching capacity: 720 Gbps |
| Capacity | IPv4 routes: 256000 ¦ IPv6 routes: 128000 ¦ NetFlow entries: 128000 ¦ ACL rules: 128000 |
| Network / Transport Protocol | TCP/IP, ICMP/IP, DHCP |
| Routing Protocol | OSPF, RIP, BGP-4, IS-IS, IGMP, PIM-SM, PIM-DM, GRE, Bidirectional PIM |
| Features | Layer 3 switching, layer 2 switching, DHCP support, MPLS support, VLAN support, IGMP snooping, DoS attack prevention, Access Control List (ACL) support, Quality of Service (QoS), MPLS VPN, Virtual Route Forwarding-Lite (VRF-Lite) |
| Compliant Standards | IEEE 802.1x, NEBS level 3, ETSI, CISPR 22 Class A, EN 60950, EN 61000-3-2, VCCI Class A ITE, IEC 60950, EN 61000-3-3, EN55024, EN55022 Class A, UL 60950, EN50082-1, AS/NZS 3260, AS/NZ 3548 Class A, CSA C22.2 No. 60950-00, ICES-003 Class A, FCC CFR47 Part 15, EN300-386, FCC CFR21 Part 1040, IEC 60825-1, EN 60825-1 |
| RAM | 2 GB (installed) / 6 GB (max) |
| Flash Memory | 1 GB (installed) / 2 GB (max) |
| Expansion / Connectivity | |
| Interfaces | 2 x 10Base-T/100Base-TX/1000Base-T – RJ-45 ¦ Management: 2 x console – RJ-45 ¦ 4 x SFP (mini-GBIC) ¦ 4 x X2 |
| Expansion Slots | 6 (total) / 4 (free) x expansion slot ¦ 6 (total) / 4 (free) x CompactFlash Card – type II |
| Installed Modules Qty (Max) | 2 (installed) / 6 (max) |
| Power Device | Internal power supply – hot-plug |
| Power Redundancy | Yes |
| Installed Qty | 2 (installed) / 2 (max) |
| Rack Mounting Kit | Included |
| MTBF | 400,000 hours |
