S5328C-HI Mainframe (24 10/100/1000Base-T, Chassis, Dual Slots of power, Without Flexible Card and Power Module)
LS-S5328C-HI Specification |
|
|
Fixed port |
24 10/100/1000Base-T ports |
|
Forwarding performance |
96 Mpps |
|
Extended slot |
provides an extended slot for an uplink subcard |
|
MAC address table |
IEEE 802.1d |
|
128K MAC address entries |
|
|
MAC address learning and aging |
|
|
Static, dynamic, and blackhole MAC address entries |
|
|
Packet filtering based on source MAC addresses |
|
|
VLAN |
4K VLANs |
|
Guest VLAN and voice VLAN |
|
|
VLAN assignment based on MAC addresses, protocols, IP subnets, policies, and ports |
|
|
VLAN mapping |
|
|
MPLS |
MPLS, MPLS VLL,L3VPN |
|
VPLS |
Martini VPLS |
|
IP routing |
Static routing, RIPv1, RIPv2, OSPF, IS-IS, BGP, and ECMP |
|
IPv6 features |
Neighbor Discovery (ND) |
|
Path maximum transmission unit (PMTU) |
|
|
IPv6 Ping, IPv6 Tracert, and IPv6 Telnet, MLD v1/v2 snooping |
|
|
ACLs based on source IPv6 addresses, destination IPv6 addresses, Layer 4 ports |
|
|
6to4 tunnel, ISATAP tunnel, and manually configured tunnel |
|
|
Multicast |
IGMP v1/v2/v3 snooping and IGMP fast leave |
|
Multicast forwarding in a VLAN and multicast replication between VLANs |
|
|
Multicast load balancing among member ports of a trunk |
|
|
Controllable multicast |
|
|
Port-based multicast traffic statistics |
|
|
IGMP v1/v2/v3, PIM-SM, PIM-DM, and PIM-SSM |
|
|
QoS/ACL |
Rate limiting on packets sent and received by an interface |
|
Packet redirection, WRED |
|
|
Port-based traffic policing and two-rate three-color CAR |
|
|
Eight queues on each port |
|
|
WRR, DRR, PQ, WRR+PQ, and DRR+PQ queue scheduling algorithms |
|
|
Re-marking of the 802.1p priority and DSCP priority |
|
|
Packet filtering at Layer 2 to Layer 4, filtering out invalid frames based on the source MAC address, destination MAC address, source IP address, destination IP address, port number, protocol type, and VLAN ID |
|
|
Rate limiting in each queue and traffic shaping on ports |
|
|
Security features |
User privilege management and password protection |
|
DoS attack defense, ARP attack defense, and ICMP attack defense |
|
|
Binding of the IP address, MAC address, interface, and VLAN |
|
|
Port isolation, port security, and sticky MAC |
|
|
Blackhole MAC address entries |
|
|
Limit on the number of learned MAC addresses |
|
|
802.1x authentication and limit on the number of users on an interface |
|
|
AAA authentication, RADIUS authentication, HWTACACS+ authentication, and NAC |
|
|
Hypertext Transfer Protocol Secure (HTTPS) |
|
|
CPU defense |
|
|
Blacklist and whitelist |
|
|
Reliability |
RRPP ring topology and RRPP multi-instance |
|
Smart Link tree topology and Smart Link multi-instance, providing the millisecond-level protection switchover |
|
|
SEP, ERPS(G.8032 v2), E-Trunk, iStack |
|
|
STP(IEEE 802.1d), RSTP(IEEE 802.1w), and MSTP(IEEE 802.1s) |
|
|
BFD for OSPF, BFD for IS-IS, BFD for VRRP, and BFD for PIM |
|
|
BPDU protection, root protection, and loop protection |
|
|
OAM |
Hardware implementation EFM OAM CFM OAM Y.1731 performance test supports hardware-level delay and jitter detection |
|
Management and |
MAC Forced Forwarding (MFF) |
|
Virtual cable test |
|
|
Port mirroring and RSPAN (remote port mirroring) |
|
|
Remote configuration and maintenance by using Telnet |
|
|
SNMP v1/v2/v3, RMON, Web NMS, GVRP, MUX VLAN, 802.3az EEE |
|
|
System logs and alarms of different levels |
|
|
Operating environment |
Operating temperature: 0 o C–50 o C (long term); -5 o C–55 o C (short term) Relative humidity: 10%–90% (non-condensing) |
|
Input voltage |
AC: Rated voltage range: 100 V to 240 V AC, 50/60 Hz Maximum voltage range: 90 V to 264 V AC, 50/60 Hz DC: Rated voltage range: –48 V to –60 V, DC Maximum voltage range: –36 V to –72 V, DC |
|
Dimensions (mm) |
442 mm x 220 mm x 43.6 mm |
|
Typical power consumption |
< 76 W |
